Motivating process

The more you practice with our HPE7-A11 simulating exam, the more compelling you may feel. Even if you are lack of time, these practice materials can speed up your pace of review. Our HPE7-A11 guide materials: HPE Network Campus Access Professional Architect Exam are motivating materials especially suitable for those exam candidates who are eager to pass the exam with efficiency. Our HPE7-A11 study prep has inspired millions of exam candidates to pursuit their dreams and motivated them to learn more high-efficiently. Many customers get manifest improvement. HPE7-A11 simulating exam will inspire your potential.

We believe you will also competent enough to cope with demanding and professorial work with competence. Our experts made a rigorously study of professional knowledge about this exam. So do not splurge time on searching for the perfect practice materials, because our HPE7-A11 guide materials: HPE Network Campus Access Professional Architect Exam are.

Superior concreteness and precise

Our HPE7-A11 guide materials: HPE Network Campus Access Professional Architect Exam are high quality and high accuracy rate products. It is all about their superior concreteness and precision that helps. Every page and every points of knowledge have been written from professional experts who are proficient in this line and are being accounting for this line over ten years. Many exam candidates attach great credence to our HPE7-A11 simulating exam. Our HPE7-A11 study prep does not need any ads, their quality has propaganda effect themselves.

If you are clueless about the oncoming exam, our HPE7-A11 guide materials: HPE Network Campus Access Professional Architect Exam are trustworthy materials for your information. More than tens of thousands of exam candidate coincide to choose our practice materials. Our HPE7-A11 simulating exam is perfect for they come a long way on their quality. If you commit any errors, which can correct your errors with accuracy rate more than 98 percent. To get more useful information about our HPE7-A11 study prep, please read the following information.

DOWNLOAD DEMO

Responsible company with humble attitude

We are never complacent about our achievements, so all content are strictly researched by proficient experts who absolutely in compliance with syllabus of this exam. Accompanied by tremendous and popular compliments around the world, to make your feel more comprehensible about the HPE7-A11 study prep, all necessary questions of knowledge concerned with the exam are included into our HPE7-A11 simulating exam. They are conductive to your future as a fairly reasonable investment.

What is more, some after-sales services behave indifferently towards exam candidates who eager to get success, our HPE7-A11 guide materials: HPE Network Campus Access Professional Architect Exam are on the opposite of it. So just set out undeterred with our practice materials, These HPE7-A11 study prep win honor for our company, and we treat it as our utmost privilege to help you achieve your goal. Our HPE7-A11 simulating exam is made by our responsible company which means you can gain many other benefits as well. On condition that you fail the exam after using our HPE7-A11 study prep unfortunately, we will switch other versions for you or give back full of your refund. If you are interested to our HPE7-A11 simulating exam, just place your order now.

HPE Network Campus Access Professional Architect Sample Questions:

1. Manufacturing ABC is an international, mid-sized company specializing in producing industrial equipment. They have been in the market for over two decades and have established themselves as a reputable player in their industry. However, due to rapid technological advancements, their current network infrastructure is outdated and struggling to keep up with the demands of modern manufacturing processes.
Manufacturing ABC's network is a mix of multi-vendor legacy wired and wireless components, causing frequent downtime and hampering their production efficiency. The aging equipment leads to slow data transfer rates, unreliable connectivity, and increased vulnerability to cyber threats.
Fiber Cabling should be also upgraded as mostly OM2 is being used.
Compounding the network issues, the recent departure of the CTO has left the company without a clear direction for the network refresh project. There is a lack of consensus among the management team regarding the scope, budget, and timeline for the upgrade.
The primary objectives of the manufacturing customer are as follows:
- Improve network performance and reliability to enhance production processes and minimize downtime
- Enhance network security to protect sensitive data and intellectual property
- Streamline communication and collaboration among different departments within the organization
- Ensure scalability to accommodate future growth and technology advancements Manufacturing ABC seeks a comprehensive network refresh that includes the following components:
- Upgrading the wired infrastructure to high-speed Ethernet switches to support increased data transfer rates and reduce latency
- Implementing a robust wireless solution with enterprise-grade access points to provide seamless connectivity across the manufacturing facility
- Centralized network management tools to simplify administration and monitoring of the network Expectations:
The customer expects the network refresh project to be handled efficiently, with minimal disruption to their ongoing operations. They are looking for a reliable and experienced network solutions provider who can understand their unique manufacturing requirements and deliver a customized solution that aligns with their budget constraints. The manufacturing customer is keen on receiving clear project proposals and support in decision-making, given the recent change of the CTO.
Your role as a network solutions provider is to address their concerns, offer expert guidance, and present a well-defined plan to meet their objectives effectively.
You assume that the current network infrastructure does not have any wireless shadow IT equipment operated on the various floors/production sites, but you want to verify this. How could you find out if wireless shadow IT equipment is currently operational?

A) Do a passive site survey, analyze the outcome together with the customer, and decommission this equipment wherever possible.
B) Do a ping sweep and document the hostnames/responses. Find out the connected switch port and walk to this location.
C) Use a wireless sniffer like Wireshark to scan the environment and look for anomalies.
D) Ask employees if they use 3rd party equipment to create isolated Hotspots.

2. Before beginning the design for HPE Aruba Networking Cloud Authentication at a distributed enterprise, you must gather information about the customer's existing identity infrastructure and endpoint capabilities. The customer has expressed interest in a cloud-native authentication solution, but you have to gather details about their identity infrastructure or endpoint capabilities.
As the network architect, you need to move forward with initial planning by documenting reasonable assumptions about their current environment and their readiness to support cloud- native authentication.
Which assumptions would be appropriate to include at this stage to guide your design process?
(Choose two.)

A) The customer client supplicants support MS-TEAP with an inner method of EAP-PKI based authentication.
B) The customer client supplicants support certificate based Extensible Authentication Protocol - Transport Layer Security.
C) The customer is willing to migrate to one of the following cloud identity platforms: Microsoft IntuneID, CloudScape Workspace.
D) The customer is willing to integrate ClearPass Device Insight with AD Domain Services synchronization agent.
E) The customer is willing to phase out non-EAP-TLS clients, allowing MAC-auth only for limited legacy devices.

3. A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client would like to include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope.
What would be needed to ensure proper licensing of the solution?

A) Qty 1 Meridian Blue Dot subscription
B) Qty 1 Meridian Tracking subscription
Qty 1 Meridian Blue Dot subscription
C) Qty 4 Meridian Blue Dot subscriptions
D) Qty 4 Meridian Map subscriptions
Qty 4 Meridian Blue Dot subscriptions

4. A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
Based on the best practices and customer requirements, what is the correct LAN approach?

A) management VLAN in the underlay, user VLANs in the overlay
B) management and user VLANs in the overlay
C) management VLAN in the overlay, user VLANs in the underlay
D) management and user VLANs in the underlay

5. A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
Based on the best practices, what should you recommend as the most cost-effective switch model for the cabins?

A) HPE Aruba Networking 6100 24G Class4 PoE 4SFP+
B) HPE Aruba Networking 6100 12G Class4 PoE 2G/2SFP+
C) HPE Aruba Networking 6000 12G Class4 PoE 2G/2SFP
D) HPE Aruba Networking 6200F 12G Class4 PoE 2G/2SFP+

Solutions: