[Apr 27, 2023] Valid Essentials Test Answers & WatchGuard Essentials Exam PDF
Realistic Essentials Exam Dumps with Accurate & Updated Questions
NEW QUESTION # 42
Only 50 clients on the trusted network of your Firebox can connect to the Internet at the same time. What could cause this? (Select one.)
- A. The device feature key allows a maximum of 50 client connections.
- B. TheLiveSecurity feature key is expired.
- C. The Outgoing policy allows a maximum of 50 client connections.
- D. The DHCP address pool on the trusted interface has only 50 IP addresses.
Answer: D
NEW QUESTION # 43
Which diagnostic tasks can you run from the Traffic Monitor tab of Firebox System Manager? (Select four.)
- A. Reputation lookup
- B. Ping
- C. MAC address lookup
- D. TCP dump
- E. Traceroute
- F. DNS lookup
Answer: B,D,E,F
NEW QUESTION # 44
When you examine the log messages In Traffic Monitor, you see that some network packets are denied with an unhandled packet log message. What does this log massage mean? (Select one.)
- A. The packet is denied because it does not match any firewall policies.
- B. The packet is denied because it matched a policy.
- C. The packet is denied because the site is on the Blocked Sites List.
- D. The packet is denied because it matched an IPS signature.
Answer: A
NEW QUESTION # 45
Only 50 clients on the trusted network of your Firebox can connect to the Internet at the same time. What could cause this? (Select one.)
- A. The device feature key allows a maximum of 50 client connections.
- B. TheLiveSecurity feature key is expired.
- C. The Outgoing policy allows a maximum of 50 client connections.
- D. The DHCP address pool on the trusted interface has only 50 IP addresses.
Answer: D
NEW QUESTION # 46
A local branch office VPN tunnel route is configured as shown in this image. On the remote peer device, what must be configured as the remote network address for this tunnel route? (Select one.)
- A. 10.0.1.0/24
- B. 10.0.20.0/24
- C. 10.0.10.0/24
Answer: C
NEW QUESTION # 47
You can use Firebox-DB authentication with any type of Mobile VPN.
- A. True
- B. False
Answer: B
NEW QUESTION # 48
How can you prevent connections to the Fireware Web UI from computers on optional interface Eth2? (Select one.)
- A. Remove Any-Optional from theTolist of the WatchGuard Web UI policy.
- B. Remove Any-Optional from theTolist of the WatchGuard policy
- C. Remove Eth2 from the Any-Optional alias.
- D. RemoveAny-Optional from theFromlist of the WatchGuard Web UI policy
- E. Remove Any-Optional from theFromlist of the WatchGuard policy.
Answer: A
NEW QUESTION # 49
To enable remote devices to send log messages to Dimension through the gateway Firebox, what must you verify is included in your gateway Firebox configuration? (Select one.)
- A. You must add a policy to the remote device configuration file to allow traffic to a Dimension.
- B. You can only send log messages to Dimension from a computer that is on the network behind your gateway Firebox.
- C. You must make sure that either the WG-Logging packet filter policy, or another policy that allows external connections to Dimension over port 4115, is included in the configuration file.
- D. You must change the connection settings in Dimension, not on the gateway Firebox.
Answer: A
NEW QUESTION # 50
From the Fireware Web UI, you can generate a report that shows your device configuration settings.
- A. True
- B. False
Answer: A
NEW QUESTION # 51
You can configure your Firebox to send log messages to how many WatchGuard Log Servers at the same time? (Select one.)
- A. Two
- B. One
- C. As many as you have configured on your network.
Answer: C
NEW QUESTION # 52
Your company denies downloads of executable files from all websites. What can you do to allow users on the network to download executable files from the company's remote website? (Select one.)
- A. Create a WebBlocker exception to allow access to the company's remote website.
- B. Add an HTTP proxy exception for the company's remote website.
- C. Create a Blocked Sites exception.
- D. Configure HTTP Request > URL Paths to allow the company's remote website.
- E. Create an IPS exception.
Answer: B
NEW QUESTION # 53
HOTSPOT
Match each WatchGuard Subscription Service with its function:
Answer:
Explanation:
Explanation:
WebBlocker
Spam Blocker Gateway / Antivirus APT Blocker Application Control Quarantee Server Intrusion Prevention Server IPS Data Loss Prvention DLP Reputation Enable Defense RED
NEW QUESTION # 54
The IP address for the trusted interface on your Firebox is 10.0.40.1/24, but you want to change the IP address for this interface. How can you avoid a network outage for clients on the trusted network when you change the interface IP address to 10.0.50.1/24? (Select one.)
- A. Add IP addresses on the 10.0.40.0/24 subnet to the DHCP Server IP address pool for this interface.
- B. Add a route to 10.0.40.0/24 with the gateway 10.0.50.1.
- C. Create a 1-to-1 NAT rule for traffic from the 10.0.40.0/24 subnet to addresses on the 10.0.50.0/24 subnet.
- D. Add 10.0.40.1/24 as a secondary IP address for the interface.
Answer: D
NEW QUESTION # 55
The IP address for the trusted interface on your Firebox is 10.0.40.1/24, but you want to change the IP address for this interface. How can you avoid a network outage for clients on the trusted network when you change the interface IP address to 10.0.50.1/24? (Select one.)
- A. Add IP addresses on the 10.0.40.0/24 subnet to the DHCP Server IP address pool for this interface.
- B. Add a route to 10.0.40.0/24 with the gateway 10.0.50.1.
- C. Create a 1-to-1 NAT rule for traffic from the 10.0.40.0/24 subnet to addresses on the 10.0.50.0/24 subnet.
- D. Add 10.0.40.1/24 as a secondary IP address for the interface.
Answer: D
NEW QUESTION # 56
If your Firebox has a single public IP address, and you want to forward inbound traffic to internal hosts based on the destination port, which type of NAT should you use? (Select one.)
- A. 1-to-1 NAT
- B. Dynamic NAT
- C. Static NAT
Answer: C
Explanation:
https://www.watchguard.com/training/fireware/10/fireware10_basics.pdf
See page 76: Static NAT allows inbound connections on specific ports to one or more public servers from a single external IP address. The Firebox changes the destination IP address of the packets and forwards them based on the original destination port number.
NEW QUESTION # 57
Match the monitoring tool to the correct task.
Which is not a Fireware monitoring tool? (Select one)
- A. Log Server
- B. FireWatch
- C. FireBox System Manager - Blocked Sites list
- D. Firebox System Manager - Authentication list
- E. Firebox System Manager - Subscription services
- F. Traffic Monitor
Answer: A
Explanation:
Explanation/Reference:
The Fireware monitor and configuration tools are: Edge Web Manager, Firebox System Manager, HostWatch, and Ping.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 58
For which of these third party authentication methods must you specify a search base? (Select two.)
- A. Active Directory
- B. LDAP
- C. SecurID
- D. RADIUS
Answer: A,B
NEW QUESTION # 59
Match each WatchGuard Subscription Service with its function.
Prevents accidental or unauthorized transmission of confidential information outside your network. (Choose one).
- A. APT Blocker
- B. Reputation EnableDefense RED
- C. Data Loss Prevention DLP
- D. Intrusion Prevention Server IPS
- E. Gateway / Antivirus
Answer: C
Explanation:
Data Loss Prevention (DLP) watches for accidental and intentional breaches of private/sensitive data through an organizational policy. Provides a library of over 200 rules to protect organization data and has the ability to parse over 30 different file formats including Microsoft Office formats and PDFs.
Reference:http://www.tomsitpro.com/articles/network-security-solutions-guide, 2-866-6.html
NEW QUESTION # 60
After you enable spamBlocker, your users experience no reduction in the amount of spam they receive.
What could explain this? (Select three.)
- A. Connections cannot be resolved to the spamBlocker servers because DNS is not configured on the Firebox.
- B. spamBlocker Virus Outbreak Detection is not enabled.
- C. The Maximum File Size to Scan option is set too high.
- D. A spamBlocker exception is configured to allow traffic from sender *.
- E. The spamBlocker action for Confirmed Spam is set to Allow.
Answer: A,D,E
Explanation:
Explanation/Reference:
A: Spamblocker requires DNS to be configured on your XTM device
B: If you use spamBlocker with the POP3 proxy, you have only two actions to choose from: Add Subject Tag and Allow. Allow lets spam email messages go through the Firebox without a tag.
D: The Firebox might sometimes identify a message as spam when it is not spam. If you know the address of the sender, you can configure the Firebox with an exception that tells it not to examine messages from that source address or domain.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 138
NEW QUESTION # 61
You can configure the SMTP-proxy policy to restrict email messages and email content based on
which of these message characteristics? (Select four.)
- A. Sender Mail From address
- B. Check URLs in message with WebBlocker
- C. Email message size
- D. Attachment file name and content type
- E. Maximum email recipients
Answer: A,B,C,E
NEW QUESTION # 62
Which of these services would you use to allow the use of P2P programs for a specific department in your organization? (Select one.)
- A. IPS
- B. Data Loss Prevention
- C. Reputation Enabled Defense
- D. Application Control
Answer: D
NEW QUESTION # 63
Which of these options are private IPv4 addresses you can assign to a trusted interface, as described in RFC 1918, Address Allocation for Private Internets? (Select three.)
- A. 192.0.2.1/24
- B. 198.51.100.1/24
- C. 172.16.0.1/16
- D. 10.50.1.1/16
- E. 192.168.50.1/24
Answer: C,D,E
NEW QUESTION # 64
How can you include log messages from more than one Firebox in a single report generated by Dimension? (Select two.)
- A. Export report data as a single PDF file for all the devices you want to include in the report.
- B. Create a report schedule that includes all the devices you want to include in the report.
- C. Create a device group and view the reports for that group.
- D. You cannot see report data in Dimension for more than one device.
Answer: B,C
NEW QUESTION # 65
Which authentication servers can you use with your Firebox? (Select four.)
- A. RADIUS
- B. Kerberos
- C. Active Directory
- D. TACACS+
- E. Linux Authentication
- F. LDAP
- G. Firebox databases
Answer: A,C,F,G
NEW QUESTION # 66
......
Essentials Exam Dumps - PDF Questions and Testing Engine: https://pass4itsure.passleadervce.com/Fireware-Essentials/reliable-Essentials-exam-learning-guide.html