Dec 20, 2023 Updated Essentials Dumps Questions For WatchGuard Exam
Best Value Available Preparation Guide for Essentials Exam
WatchGuard Essentials (Fireware Essentials) Exam is a certification exam designed to test the skills and knowledge of IT professionals who work with WatchGuard firewall solutions. Essentials exam covers a range of topics related to WatchGuard firewalls, including network security, VPNs, user authentication, and more. Passing Essentials exam is a great way for IT professionals to demonstrate their expertise in WatchGuard firewall solutions and advance their careers.
NEW QUESTION # 26
While troubleshooting a branch office VPN tunnel, you see this log message:
2 014-07-23 12:29:15 iked (203.0.113.10<->203.0.113.20) Peer proposes phase one encryption 3DES, expecting AES
What settings could you modify in the local device configuration to resolve this issue? (Select one.)
- A. BOVPN-Allow policies
- B. BOVPN Gateway settings
- C. BOVPN Tunnel settings
- D. BOVPN Tunnel Route settings
Answer: B
Explanation:
Explanation/Reference:
The WatchGuard BOVPN settings error in this example states phase one encryption. Only the BOVPN Gateway settings can specify phase one settings. BOVPN Tunnel settings specify phase 2 settings.
NEW QUESTION # 27
An email newsletter about sales from an external company is sometimes blocked by spamBlocker. What option could you choose to make sure the newsletter is delivered to your users? (Select one.)
- A. Set the spamBlocker action to quarantine the email for later retrieval.
- B. Add a spamBlocker exception based on the From field of the newsletter email.
- C. Set the spamBlocker virus outbreak detection action to allow emails from the newsletter source.
- D. Add a spamBlocker subject tag for bulk email messages.
Answer: D
NEW QUESTION # 28
Which WatchGuard Subscription Service must be enabled in a proxy policy before you can use APT Blocker? (Select one.)
- A. WebBlocker
- B. Gateway Antivirus
- C. IPS
- D. Application Control
- E. RED
Answer: B
NEW QUESTION # 29
Which of these options are private IPv4 addresses you can assign to a trusted interface, as described in RFC
1918, Address Allocation for Private Internets? (Select three.)
- A. 192.168.50.1/24
- B. 172.16.0.1/16
- C. 198.51.100.1/24
- D. 10.50.1.1/16
- E. 192.0.2.1/24
Answer: A,B,D
Explanation:
Explanation/Reference:
NEW QUESTION # 30
In a Mobile VPN configuration, why would you choose default route VPN over split tunnel VPN? (Select one.)
- A. Default route VPN uses less processing power
- B. Default route VPN uses less bandwidth
- C. Default route VPN automatically allows dynamic NAT
- D. Default route VPN allows your Firebox to examine all remote user traffic
Answer: D
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/mvpn/pptp/mvpn_pptp_internet-access_c.html
The most secure option is to require that all remote user Internet traffic is routed through the VPN tunnel to the XTM device. Then, the traffic is sent back out to the Internet. With this configuration (known as default-route VPN), the XTM device is able to examine all traffic and provide increased security, although it uses more processing power and bandwidth.
NEW QUESTION # 31
While troubleshooting a branch office VPN tunnel, you see this log message:
2014-07-23 12:29:15 iked (203.0.113.10<->203.0.113.20) Peer proposes phase one encryption 3DES, expecting AES What settings could you modify in the local device configuration to resolve this issue? (Select one.)
- A. BOVPN-Allow policies
- B. BOVPN Gateway settings
- C. BOVPN Tunnel settings
- D. BOVPN Tunnel Route settings
Answer: B
Explanation:
Explanation/Reference:
The WatchGuard BOVPN settings error in this example states phase one encryption. Only the BOVPN Gateway settings can specify phase one settings. BOVPN Tunnel settings specify phase 2 settings.
NEW QUESTION # 32
Which of these actions adds a host to the temporary or permanent blocked sites list? (Select three.)
- A. In Policy Manager, select Setup> Default Threat Protection > Blocked Sites and click Add.
- B. Add the site to the Blocked Sites Exceptions list.
- C. On the Firebox System Manager >Blocked Sites tab, select Add.
- D. Enable the AUTO-block sites that attempt to connect option in a deny policy.
Answer: A,C,D
NEW QUESTION # 33
Match the monitoring tool to the correct task.
Which is not a Fireware monitoring tool? (Select one)
- A. Log Server
- B. Firebox System Manager - Subscription services
- C. Firebox System Manager - Authentication list
- D. FireBox System Manager - Blocked Sites list
- E. FireWatch
- F. Traffic Monitor
Answer: A
Explanation:
The Fireware monitor and configuration tools are: Edge Web Manager, Firebox System Manager, HostWatch, and Ping.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59,
NEW QUESTION # 34
Match each type of NAT with the correct description:
Conserves IP addresses and hides the internal topology of your network. (Choose one)
- A. Dynamic NAT
- B. NAT Loopback
- C. 1-to1 NAT
Answer: A
Explanation:
Explanation/Reference:
Dynamic NAT is also known as IP masquerading. With dynamic NAT many computers can connect to the Internet from one public IP address. Dynamic NAT gives more security for internal hosts that use the Internet, because it hides the IP addresses of hosts on your network.
Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/nat/ nat_dynamic_use_c.html%3FTocPath%3DNetwork%2520Address%2520Translation%2520(NAT)%7CAbout%
2520Dynamic%2520NAT%7C_____0
NEW QUESTION # 35
If your Firebox has a single public IP address, and you want to forward inbound traffic to internal hosts based on the destination port, which type of NAT should you use? (Select one.)
- A. 1-to-1 NAT
- B. Dynamic NAT
- C. Static NAT
Answer: C
NEW QUESTION # 36
When your device is in a default state, to which interface do you connect your management computer so you can use the Quick Setup Wizard or Web Setup Wizard to configure the device? (Select one.)
- A. Console interface
- B. Any interface
- C. Interface 1
- D. Interface 0
Answer: C
NEW QUESTION # 37
If your Firebox has a single public IP address, and you want to forward inbound traffic to internal hosts based on the destination port, which type of NAT should you use? (Select one.)
- A. 1-to-1 NAT
- B. Dynamic NAT
- C. Static NAT
Answer: A
NEW QUESTION # 38
Match the monitoring tool to the correct task.
Which tool can view a list of users connected to the Firebox? (Select one)
- A. Firebox System Manager - Subscription services
- B. Log Server
- C. Firebox System Manager - Authentication list
- D. FireBox System Manager - Blocked Sites list
- E. FireWatch
- F. Traffic Monitor
Answer: C
Explanation:
Explanation/Reference:
You can view a list of users connected to the Firebox through HostWatch, and you can also use Authentication List, which identifies the IP addresses and user names of all the users that are authenticated to the Firebox.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 39
Which authentication servers can you use with your Firebox? (Select four.)
- A. Linux Authentication
- B. RADIUS
- C. Kerberos
- D. Firebox databases
- E. Active Directory
- F. LDAP
- G. TACACS+
Answer: B,D,E,F
NEW QUESTION # 40
Which takes precedence: WebBlocker category match or a WebBlocker exception?
- A. WebBlocker category match
- B. WebBlocker exception
Answer: B
NEW QUESTION # 41
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. IP spoofing
- B. Denial of service attacks
- C. Malware in downloaded files
- D. Viruses in email messages
- E. Access to inappropriate websites
- F. Flood attacks
- G. Port scans
Answer: A,B,F,G
Explanation:
Explanation/Reference:
B: The default configuration of the XTM device is to block DDoS attacks.
C: In a flood attack, attackers send a very high volume of traffic to a system so it cannot examine and allow permitted network traffic. For example, an ICMP flood attack occurs when a system receives too many ICMP ping commands and must use all of its resources to send reply commands. The XTM device can protect against these types of flood attacks: IPSec, IKE, ICMP. SYN, and UDP.
E: When the Block Port Space Probes (port scans) and Block Address Space Probes check boxes are selected, all incoming traffic on all interfaces is examined by the XTM device.
CG: Default packet handling can reject a packet that could be a security risk, including packets that could be part of a spoofing attack or SYN flood attack Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/intrusionprevention/ default_pkt_handling_opt_about_c.html%3FTocPath%3DDefault%2520Threat%2520Protection%7CAbout%
2520Default%2520Packet%2520Handling%2520Options%7C_____0
NEW QUESTION # 42
After you enable spamBlocker, your users experience no reduction in the amount of spam they receive. What could explain this? (Select three.)
- A. A spamBlocker exception is configured to allow traffic from sender *.
- B. The Maximum File Size to Scan option is set too high.
- C. Connections cannot be resolved to the spamBlocker servers because DNS is not configured on the Firebox.
- D. spamBlocker Virus Outbreak Detection is not enabled.
- E. The spamBlocker action for Confirmed Spam is set to Allow.
Answer: A,C,E
Explanation:
Explanation/Reference:
A: Spamblocker requires DNS to be configured on your XTM device
B: If you use spamBlocker with the POP3 proxy, you have only two actions to choose from: Add Subject Tag and Allow. Allow lets spam email messages go through the Firebox without a tag.
D: The Firebox might sometimes identify a message as spam when it is not spam. If you know the address of the sender, you can configure the Firebox with an exception that tells it not to examine messages from that source address or domain.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 138
NEW QUESTION # 43
You can configure the SMTP-proxy policy to restrict email messages and email content based on which of these message characteristics? (Select four.)
- A. Check URLs in message with WebBlocker
- B. Maximum email recipients
- C. Attachment file name and content type
- D. Email message size
- E. Sender Mail From address
Answer: B,C,D,E
Explanation:
A: Another way to protect your SMTP server is to restrict incoming traffic to only messages that use your company domain. In this example, we use the mywatchguard.com domain. You can use your own company domain.
1.From the SMTP-Incoming Categories list, select Address > Rcpt To.
2.In the Pattern text box, type*.mywatchguard.com. Click Add.This denies anyemail messages with a Rcpt To address that does not match the company domain.
3.Click OK to close the SMTP Proxy Action Configuration dialog box.
C: In this exercise we will reduce the maximum email size to 5 MB (5, 000 kilobytes).
1.From the SMTP ProxyAction dialog box under the Categories list, select General > General Settings.
2.Find the Limits section. In the Set the maximum email size value box, type 5000.
D: Example: He must configure the Firebox to allow Microsoft Access database files to go through the SMTP proxy. He must also configure the Firebox to deny Apple iTunes MP4 files because of a recent vulnerability announced by Apple.
1.From the SMTP-Incoming Categories list, select Attachments > Content Types.
2.In the Actions to take section,use the None Matched drop-down list to select Allow.
This allows all content types through Firebox to the SMTP server. After Successful Company is able to add in the specific content types they want to allow, they set this parameter to strip content typethat does not match their list of allowed content types.
From the SMTP-Incoming Categories list, select Attachments > Filenames.
4. The filename extension for Microsoft Access databases is ".mdb". In the list of filenames, find and select .mdb. Click Remove. Click Yes to confirm.
3. If no rules match, the Action to take option is set to allow the attachment. In this example, MS Access files are now allowed through the Firebox.
5. In the Pattern text box, type *.mp4. Click Add.
This rule configures the Firebox to deny all files with the Apple iTunes ".mp4" file extension bound for the SMTP server.
E: The Set the maximum email recipient checkbox is used to set the maximum number of email recipients to which a message can be sent in the adjacent text box thatappears, type or select the number of recipients.
The XTM device counts and allows the specified number of addresses through, and then drops the other addresses. For example, if you set the value to 50 and there is a message for 52 addresses, the first 50addresses get the email message. The last two addresses do not get a copy of the message.
Incorrect:
Not B: Webblocker is configured through a HTTP-policy, not through an SMTP policy.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10,pages 125, 126
Reference:http://watchguard.com/help/docs/wsm/xtm_11/en-us/content/enus/proxies/smtp/proxy_smtp_gen_settings_c.html
NEW QUESTION # 44
A local branch office VPN tunnel route is configured as shown in this image. On the remote peer device, what must be configured as the remote network address for this tunnel route? (Select one.)
- A. 10.0.20.0/24
- B. 10.0.10.0/24
- C. 10.0.1.0/24
Answer: B
NEW QUESTION # 45
You can configure your Firebox to send log messages to how many WatchGuard Log Servers at the same time? (Select one.)
- A. Two
- B. As many as you have configured on your network.
- C. One
Answer: B
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/logging/logging_and_logfiles_about_c.html
NEW QUESTION # 46
You can configure your Firebox to send log messages to how many WatchGuard Log Servers at the same time? (Select one.)
- A. Two
- B. As many as you have configured on your network.
- C. One
Answer: A
NEW QUESTION # 47
How is a proxy policy different from a packet filter policy? (Select two.)
- A. Only a proxy works ta the application, network, and transport layers to examine all connection data.
- B. Only a proxy policy uses the IP source, destination, and port to control network traffic.
- C. Only a proxy policy examines information in the IP header.
- D. Only a proxy policy can prevent specific threats without blocking the entire connection.
Answer: A,B
NEW QUESTION # 48
Which WatchGuard tools can you use to review the log messages generated by your Firebox? (Select three).
- A. Dimension > Log manager
- B. Firebox System Manager > Traffic Monitor
- C. Firebox System Manager > Status Report
- D. WatchGuard System Manager > Policy Manager
- E. Fireware XTM Web UI > Traffic Monitor
Answer: A,B,C
NEW QUESTION # 49
Which tool can add an IP address for the Firebox to permanently block? (Select one)
- A. Firebox System Manager - Subscription services
- B. Firebox System Manager - Authentication list
- C. Log Server
- D. FireWatch
- E. Traffic Monitor
- F. FireBox System Manager - Blocked Sites list
Answer: F
Explanation:
Explanation/Reference:
Block a site permanently
The Successful Company network administrator has been driven to distraction recently by a script kiddy using addresses in the 192.136.15.0/24 network to run probes of the Successful network. In this exercise, we permanently block all connections from that network.
1. From Policy Manager, select Setup > Default Threat Protection > Blocked Sites.
The Blocked Sites Configuration dialog box opens.
2. On the Blocked Sites tab, click Add.
3. The Add Site dialog box opens. 3. Use the Choose Type drop-down list to select Network IP. In the Value text box, type 192.136.15.0/ 24.
4. Click OK.
The entry appears in the Blocked Sites list. With this configuration, the Firebox blocks all packets to and from the 192.136.15.0/24 network range.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 50
You can use Firebox-DB authentication with any type of Mobile VPN.
- A. False
- B. True
Answer: B
Explanation:
http://www.watchguard.com/help/docs/fireware/11/en-US/Content/en-US/mvpn/general/mobile_vpn_types_c.html
NEW QUESTION # 51
......
Full Essentials Practice Test and 75 Unique Questions, Get it Now!: https://pass4itsure.passleadervce.com/Fireware-Essentials/reliable-Essentials-exam-learning-guide.html