Real NS0-593 dumps - Real Network Appliance dumps PDF in here [Jan-2024]
Realistic PassLeaderVCE NS0-593 Dumps PDF - 100% Passing Guarantee
The NS0-593 exam tests the candidate's knowledge on various topics such as ONTAP Security, High Availability, Data Protection, and Storage Efficiency. Candidates will be required to demonstrate their ability to install, configure, and troubleshoot NetApp ONTAP storage systems. They will also need to show their proficiency in using different tools to monitor and manage various aspects of the ONTAP storage environment.
Network Appliance NS0-593 exam is the certification which is specifically designed for NetApp Certified Support Engineer ONTAP Specialist. NetApp Certified Support Engineer ONTAP Specialist certification exam will provide the potential candidates with an understanding of NetApp ONTAP technology, networking, and storage protocols used in NetApp storage systems. It is a great opportunity for IT professionals who want to enhance their skills and knowledge and gain recognition in the IT industry.
The NS0-593 certification exam covers a wide range of topics related to NetApp ONTAP storage systems. These topics include installation and configuration, data protection, performance optimization, troubleshooting, and management. NS0-593 exam consists of 60 multiple-choice questions that must be completed within 1 hour and 30 minutes. To pass the exam, candidates must score at least 70%. NS0-593 exam is available in multiple languages and can be taken at Pearson VUE testing centers worldwide.
NEW QUESTION # 26
You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size
of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and
you receive anout of apace error message on your host.
What would cause this error?
- A. The maxdirsize Is exceeded in the ONTAP software.
- B. All constituent volumes are full.
- C. The maximum number of volume constituents has been reached in the ONTAP software.
- D. The inode limit is exceeded in the ONTAP software.
Answer: D
NEW QUESTION # 27
An administrator receives the following error message:
What are two causes for this error? (Choose two.)
- A. There is excessive SATA HDD load.
- B. A disk is falling.
- C. An SSD disk is performing garbage collection to create a dense data layout.
- D. There Is excessive SSD load causing the wear leveling to become unbalanced.
Answer: A,D
NEW QUESTION # 28
A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?
- A. The AUSO feature is not available in Metrocluster IP installations by design.
- B. This is a configuration failure, you can activate that feature for the customer.
- C. A faulty link automatically deactivated the AUSO feature.
- D. The AUSO feature cannot be activated due to a non-mirrored aggregate.
Answer: D
NEW QUESTION # 29 
Referring to the exhibit, from which delay center is most of the latency for voll?
- A. Disk
- B. NVRAM
- C. Data
- D. Network
Answer: D
NEW QUESTION # 30
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. The iSCSI service is not enabled on the interface.
- B. CHAP isnot configured correctly for the specified initiator.
- C. iSNS is not enabled on the storage virtual machine.
- D. The WWPN was not added to the initiator group.
Answer: D
NEW QUESTION # 31
A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.
Referring to the Information shown in the exhibit, what Is the source of the problem?
- A. The aggregate aggr2 has a failed disk.
- B. The broken disk in Node03 is the source of the problem.
- C. Thev1db database is offline.
- D. The databases On Node03 must be Switched from secondary to master.
Answer: D
NEW QUESTION # 32
You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show
command for more Information. You notice the "Urge" column has non-zero values.
In this scenario, which statement is true?
- A. The data placement is uneven.
- B. The constituent volumes are out ofInodes.
- C. The aggregate is completely full.
- D. The constituent volumes are completely full.
Answer: C
NEW QUESTION # 33
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?
- A. Delete unneeded files from the directory.
- B. Move the volume to a different aggregate.
- C. Increase the maximum numberof files for the volume.
- D. Increase the maximum directory size for the volume.
Answer: C
NEW QUESTION # 34
Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC
protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports
that the server's FC HBA port Is online, but the LUN does not show up.
Referring to the exhibit, what is the reason for this problem?
- A. The esxserver igroup contains incorrect IQNs.
- B. The zoning on the FC switches Is Incorrect.
- C. The FC service has not been configured on the SVM.
- D. The LUN Is not mapped to the correct SCSI ID.
Answer: D
NEW QUESTION # 35
A customer reports that while Installing Windows updates on their external Vscan servers, clients couldnot
access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The
customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Enable the -scan-mandatory flag in the Vscan policy.
- B. Modify the CIFS shares to be continuously available (CA) shares.
- C. Disable the -scan-mandatory flag in the Vscan policy.
- D. Update the Vscan servers one at a time.
Answer: A,B
NEW QUESTION # 36
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is trying to log in as an anonymous user.
- B. The application is using v4 signatures.
- C. The application is using v2 signatures.
- D. The application is trying to access using the HTTP protocol.
Answer: A
NEW QUESTION # 37
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- B. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
- C. before Reset BBSP:C=00 L=00 FIFO:
- D. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
Answer: B
NEW QUESTION # 38
You receive the panic message shown in the exhibit.
In this scenario, which component should you troubleshoot first?
- A. the MetroCluster FC-Vl card in slot 6
- B. the memory module in slot 1
- C. the PCI card in slot 3
- D. the CPU
Answer: D
NEW QUESTION # 39
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The clients must be restarted to start using NFSv4.
- B. The export policy is not configured properly.
- C. The customer did not configure name services on the SVM.
- D. The ID mapping domains do not match between the client and server.
Answer: B
NEW QUESTION # 40
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.
Referring to the exhibit, which statement is correct?
- A. All nodes in the cluster reset and NAS data UFs are not accessible after reboot.
- B. No takeover event will occur and NAS data UFs will not be accessible.
- C. Both nodes race to takeover the other, one node will takeover the other node.
- D. NAS data UFs are accessible on only the node that has Epsilon.
Answer: A
NEW QUESTION # 41
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.
Referring to the exhibit, what Is the reason for the error?
- A. The volume has not beenmounted.
- B. The CIFS service is not authenticating properly with the domain controller.
- C. The volume must have a type of DP.
- D. The CIFS service is not in workgroup mode.
Answer: A
NEW QUESTION # 42
......
Verified NS0-593 dumps Q&As Latest NS0-593 Download: https://pass4itsure.passleadervce.com/NetApp-NCSE/reliable-NS0-593-exam-learning-guide.html